Whirlpool Load & Go Quick Start Manual

Using the Load & Go Detergent Dispenser
Using the Load & Go™ Detergent Dispenser on your Whirlpool Top
Load Washer
Load & Go™ Dispenser:
Load & Go™ is a system that allows you to load a large amount of HE liquid detergent into your washer and have it
dispense the correct amount cycle after cycle.
Do not place single-dose laundry packets or powder detergent into the dispenser. Add single-dose laundry packets or
powder detergent directly to the washer basket.
Using the Load & Go™ detergent dispenser and the single-dose detergent dispenser at the same time will result in
oversudsing. To use the single-dose detergent dispenser, the Load & Go™ system must be disabled.
The Load & Go™ dispenser is specially designed to hold enough liquid detergent for multiple loads and does not need
to be refilled every time the washer is used. Only refill the Load & Go™ dispenser when the level of liquid detergent
seen through the clear drawer is visibly low. The Load & Go™ dispenser holds enough detergent to last approximately
14 loads.
https://producthelp.whirlpool.com/?title=Laundry/Washers/Product_Info/Washer_Product_Assistance/Using_the_Load_%26_...
Updated: Wed, 15 Sep 2021 15:56:51 GMT
Powered by
1