Login To Your Freeway Dsl - VisionNet M505N User Manual

4.

5.1 Login to Your Freeway DSL

This section guides you through configuring your Freeway DSL. You should have your
computers configured for DHCP mode and have proxies disabled on your browser. If you do
not get the page as shown below, you may need to delete your temporary Internet files by
flushing the cached web pages.
Follow the procedures below to login to your Freeway DSL.
1.
Open your web browser. Type the default IP
address of the Freeway DSL http://192.168.1.1
and press Enter.
The Log In page appears.
2.
Enter user name as admin and password as
admin (case sensitive).
3.
Click OK.
The main page appears.
There are two default user name and password combinations. The user / user
name and password combination allow you to view the device status, but you
cannot change or save configurations. The admin / admin combination allows you
to perform all functions. Passwords can be changed at any time. You can change
Note
the password in Management->Access Control->Passwords page at any time.
This web page layout of Freeway DSL is shown as below.
ADSL2/2+ 11N WiFi Router User's Manual
5