Advanced - VisionNet M505N User Manual

7.5 Advanced

This page allows you to configure setting for advanced wireless features.
Field
Band
Channel
Auto Channel Timer
802.11n/EWC
Bandwidth
Description
The supported band is 2.4GHz.
Select the channel you want to use. The wireless network is
divided into several channels (region depends). Each channel
broadcasts on a slightly different frequency; if you are
experiencing interference with another device such as a baby
monitor, security alarm, or cordless phone, then change the
channel on your Freeway DSL.
This value cannot be changed.
Enhanced Wireless Consortium
Select the bandwidth to be either 20MHz or 40MHz (dual channel),
that the Freeway DSL will use if 802.11n/EWC is configured as
Auto and the Channel is configured as Auto. If the Freeway DSL
detects other adjacent wireless networks, it will use 20 MHz
operation so as to not interfere with the networks. If no other
adjacent networks are detected, the Freeway DSL will use 40MHz
operation. In both 20 MHz and 40 MHz operation, when the
802.11n/EWC is configured to Auto, the Freeway DSL will use
47
ADSL2/2+ 11N WiFi Router User's Manual