VisionNet M505N User Manual page 17

Authentication Method
Enable Fullcone NAT
Dial on Demand
Inactivity Timeout
(minutes)
PPP IP Extension
Use Static IPv4 Address
Enable PPP Debug Mode
Bridge PPPoE frames
Between WAN and Local
Ports
IGMP Multicast
IP over Ethernet (MER) Mode
Field
Obtain an IP Address
Automatically
Option 60 Vendor ID
Option 61 IAID
Option 61 DUID
Option 125
User the following
Static IP Address
Select the authentication method to be PAP, CHAP or
MSCHAP. Select "Auto" to allow the Freeway DSL to
negotiate with PPP server automatically.
Check to enable fullcone NAT feature.
Check to enable DOD feature.
Specify the inactivity timeout (in minute) for DOD feature.
Check to enable PPP IP extension.
Check and enter the static IPv4 address.
Check to enable PPP debug mode.
Check to enable the PPPoE fames bridging between WAN
and Local Ports.
Check to enable IGMP multicasting.
Description
Select and select your preferred WAN interface from drop-down
list. This allows the Freeway DSL to obtain the DNS server
information automatically.
Your ISP will assign the Vendor Class IDentifier automatically.
This option can be used by DHCP clients to identify the vendor
and functionality of a DHCP client.
Your ISP will assign the IAID (Identity Association IDentifier)
automatically.
Your ISP will assign the DUID (DHCP Unique IDentifier))
automatically.
Select this item (Vendor-Identifying Vendor-Specific) to tell the
Freeway DSL which firmware it has to download.
Select this mode and enter the static IP address, subnet mask
and gateway IP address provided by your ISP.
13
ADSL2/2+ 11N WiFi Router User's Manual