Incoming - VisionNet M505N User Manual

6.5.2 Incoming

Incoming IP filter filters the WAN traffic to the LAN side. When the firewall is enabled on a
WAN or LAN interface, all incoming IP traffic is blocked. This page allows you to configure
filters for accepting some incoming IP traffic.
Click Add to create a filter rule to identify outgoing IP traffic. Specify a new filter name and at
least one condition. Then click Save/Apply. All of the specified conditions in this filter rule
must be satisfied for the rule to take effect.
Field
Filter Name
Protocol
Source IP Address /
Subnet Mask/ Port
Description
Enter a name for this filter rule.
Select the protocol to be used from the drop-down list.
Enter the source (from the WAN side) IP address, subnet mask
and port number.
22
ADSL2/2+ 11N WiFi Router User's Manual