Security - Ip Filtering; Outgoing - VisionNet M505N User Manual

6.5 Security – IP Filtering

6.5.1 Outgoing

The outgoing filter blocks the LAN traffic from entering the WAN side. By default, all outgoing
IP traffic from LAN is allowed, but some IP traffic can be blocked by setting up filters.
Click Add to create a filter rule to identify outgoing IP traffic. Specify a new filter name and at
least one condition. Then click Save/Apply. All of the specified conditions in this filter rule
must be satisfied for the rule to take effect.
Field
Filter Name
Protocol
Source IP Address /
Subnet Mask/ Port
Destination IP Address
/ Subnet Mask / Port
Description
Enter a name for this filter rule.
Select the protocol to be used from the drop-down list.
Enter the source (from the LAN side) IP address, subnet mask
and port number.
Enter the destination (from the WAN side) IP address, subnet
mask and port number.
21
ADSL2/2+ 11N WiFi Router User's Manual