VisionNet M505N User Manual page 39

Click Add to create new interface group. To support Interface Grouping feature, you must
create mapping groups with appropriate LAN and WAN interfaces. Then click Save/Apply.
Only the default group has IP interface.
Field
Group Name
WAN Interface used in
the grouping
Grouped LAN Interfaces
Available LAN interfaces
Automatically Add
Clients with the following
DHCP Vendor IDs
If a vendor ID is configured for a specific client device, you have to reboot
IMPORTANT! the client device attached to the Freeway DSL to allow it to obtain an
appropriate IP address.
Description
Enter a name for this group.
Select a WAN interface used in this grouping fro the drop-
down list.
Select interfaces from the Available LAN Interfaces list and
use the arrow buttons to map them to the Grouped LAN
Interfaces list.
These are the available LAN interfaces on Freeway DSL.
Configure a DHCP vendor ID. Any DHCP client requests
with the specified vendor ID will be denied an IP address
from the local DHCP server.
35
ADSL2/2+ 11N WiFi Router User's Manual