Batteries; Installing Aa Batteries - Philips intelligent remote control User Manual

CHAPTER 1

Batteries

1
The remote control uses four AA batteries or the rechargeable battery pack
supplied with the recharging dock. If you purchased the recharging dock, see
"Using the recharging dock" on page 11.

Installing AA batteries

•
Install four AA batteries as shown.
Slide the battery cover
off the back of the
remote control.
Insert 4 AA batteries
as shown. Improper
installation could damage
the remote control.
When you're done, slide
the battery cover back
on. The remote control
starts up automatically,
and the word "remote
control" appears on the
display. After a few
seconds, the remote
control beeps twice to
indicate that it's ready to
use.
Chapter 1—Batteries 9