Using Macros; To Execute A Macro; To Stop A Macro - Philips intelligent remote control User Manual

Using macros

To execute a macro

•
Tap the macro button.
It may take awhile for the macro to finish playing, depending on the number of
commands. Be sure to keep the remote control aimed in the direction of your
components until all the commands have been sent.
If you open the macro before running it, the remote control will show you
TIP
each command as it is sent. To open a macro, first display the macro panel that
contains the macro you want to view. While holding down the Left button
(labeled OPEN ), tap the macro. Then, play the macro by pressing the Right
button (labeled PLAY ).

To stop a macro

•
Tap the macro button again, or press the Right button, labeled STOP .
The remote control
icon indicates that
commands are being
sent.
Using macros 61