Philips intelligent remote control User Manual page 66

Second Setup panel
Setting
Light Sensor
Set Level
Mode Menu
Touchscreen
Beep
Button Beep
Calibrate
Revert
64 Chapter 5—Settings
What it does
Shows the current level of light in the room (ambient light).
Sets the light level at
which the light sensor
turns the backlight on.
Hides or shows the
Mode button
the display. Hiding the
Mode button prevents
unwanted changes to
stored commands.
Adjusts or turns off the
touchscreen beep.
Adjusts or turns off the
beep of the direct-
access, Left, and Right
buttons.
Calibrates the touchscreen.
See Chapter 6, "Troubleshooting." You won't normally
need to adjust the calibration.
Reverts to the factory default configuration. All customization
and programming is lost.
See Chapter 6, "Troubleshooting." You won't normally
need to use the Revert button.
How to adjust it
Tap Level, then use the Left (-)
and Right (+) buttons to
increase or decrease the
sensitivity.
To set the level relative to the
current lighting, first tap Set; the
Level indicator shows the
current light level. Then use the
Left and Right buttons to
increase or decrease the
sensitivity.
Tap the Mode Menu button
on once.
Tap repeatedly to cycle through
four volume levels, including
off.
Tap repeatedly to cycle through
four volume levels, including
off.