To Switch Modes; To Show Or Hide The Mode Menu - Philips intelligent remote control User Manual

To switch modes

1 Tap the Mode button
If you don't see the Mode button on the display, it has been hidden to protect
the remote control from accidental changes. To show the Mode button, refer to
"To show or hide the Mode menu" on page 29.
2 In the Mode menu, tap the name of the mode you want.

To show or hide the Mode menu

You can hide the Mode menu so that other users don't inadvertently make
changes to your custom commands. To hide the Mode menu:
1 Make sure the remote control is in Use mode.
For help, refer to "Use mode" on page 22.
2 Press and hold the icon
appear.
3 Scroll down
4 Tap the Mode Menu button to hide the Mode menu.
5 Tap to exit Setup.
The Mode button
To show the Mode menu, repeat steps 1 through 4.
to open the Mode menu.
for a few seconds, until the Setup panels
to the second Setup panel.
is no longer visible on the display.
Mode menu
Tap any mode name
to change modes.
Tap the Mode button
to open or close the
Mode menu.
Mode menu is
hidden
Understanding modes 29