To View The Commands In A Macro; Editing Macros; To Edit A Previously Recorded Macro - Philips intelligent remote control User Manual

To view the commands in a macro

To view the commands in a macro while in Use mode:
1 Display the macro panel that contains the macro.
2 Press and hold the Left button, labeled OPEN . While holding it down, tap
the macro you want to open.
Use the scroll buttons
To execute (play) the macro, press the Right button. When you're ready to close
the macro, press the Left button.

Editing macros

Once you have recorded a macro, you can add, remove, or change the order of
commands in the macro. You can also add delays.
You should add a delay after turning on a device before sending more
NOTE
commands to the device. Some devices recognize infrared commands only after
they have had time to "warm up."

To edit a previously recorded macro

1 Display the macro panel that contains the macro.
2 Switch the remote control to Record mode: Tap the Mode button
display the Mode menu. Then, tap
3 Tap the macro you want to edit.
The contents of the macro appear on the display.
Tap a command
to select it.
Add a delay.
Scroll to see more
commands in this
macro.
and to view the entire macro.
.
to
Move the selected
command up or
down in the list.
Delete the selected
command.
Editing macros 57