Philips intelligent remote control User Manual page 55

3 Scroll to the macro panel where you want the new macro to appear.
You can add the macro to any macro panel that has space for a new button.
(The macro can only be placed on a macro panel; it can't be placed on a device
control panel.)
From the Macro
menu, choose the
macro group that
the new macro
will belong to.
At least one macro group must exist before you can create a macro. If
NOTE
you need to create a macro group, see "Organizing macros into groups" on
page 59.
4 Switch the remote control to Record mode: Tap the Mode button
display the Mode menu. Then, tap
The label appears, and "empty" macro buttons, which were hidden in Use
mode, are now visible.
The
NOTE
active—that is, if the Macro menu is open, or if a macro panel is currently
displayed. If the Device tab is active,
won't be able to record a macro.
button appears on the Mode menu only if the Macro tab is
.
will appear instead of
Recording macros
Room for new
macros on this panel
to
, and you
53