Clas Ohlson 953 User Manual

Wireless Sports Headphones
Art.no 38-7756-1, -2 Model 953
Please read the entire instruction manual before using the product and then save
it for future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data. In the event of technical problems or
other queries, please contact our Customer Services.
Safety
• Never subject the headphones to high temperatures, dust, heavy vibration,
impacts, water or moisture.
• Do not place the headphones where there is a risk of them falling into water or
other liquid.
• Do not expose the headphones to direct sunlight for prolonged periods.
• Never attempt to tamper with or modify the headphones in any way.
• Only use the supplied charger cable.
• Do not leave the headphones on charge for longer than necessary when they
are not in use. Discontinue charging during thunderstorms.
• Check your local regulations regarding mobile phone use in combination with driving.
• Shut off both the headphones and mobile phone in areas where you are
requested to do so, such as hospitals, aircraft or explosive environments.
Buttons and functions
1. LED indicator
2. Micro USB connection for
the included charger lead
3. [ + ] Next track, increase volume
4. [ ►ll ] On/off, play/pause
5. [ – ] Previous track, decrease volume
GREAT BRITAIN • customer service tel: 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk postal: 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Charging
Charge the battery for 2 hours before using the headphones for the first time.
1. Connect the included charger lead to the headphones' charging port and to
a computer or other USB charger.
2. The LED indicator (1) shines red when charging is in progress.
3. The LED indicator shines blue once the battery is fully charged.

Operating instructions

On/off button
On
Hold in [ ►ll ] for 3 sec until the LED indicator displays 3 blue flashes and emits
an audible signal.
Off
Hold in [ ►ll ] for 3 sec until the LED indicator displays 3 red flashes and emits
an audible signal.
Bluetooth connection
Hold in [ ►ll ] for approx 5 seconds until the headphones emit an audible signal
1.
and the LED begins alternately flashing between red and blue.
2. Activate Bluetooth mode on the device that you want to connect to.
3. The headphones will appear on your device as 953, select it and pair them with
your device.
4. Once the headphones have been paired the LED will begin displaying a slow
blue flashing pattern.
5. Start playback on your device. Set the desired volume levels both on
the external device and the headphones.
6. Control playback either from your device or headphones according to
the Buttons and functions instructions above.
1
Note:
2
• The headphones will automatically connect to the last connected device if they
3
are on and Bluetooth is activated on the last connected device.
4
• If you are prompted to enter a PIN code on your device, you should enter
0000 (four zeroes). Certain devices may also require you to approve the connection.
5
• If you receive a call while listening to music via Bluetooth, playback will be
stopped automatically. Once the call ends, music playback will automatically
be resumed (if your phone settings supports this).

Call management

• Accepting an incoming call: Press [ ►ll ] once.
• Ending a call: Press [ ►ll ] once.
• Rejecting an incoming call: Press [ ►ll ] twice.
• Transferring the call between the mobile phone and the headphones:
Hold in [ ►ll ] for approx 2 sec to transfer the call to the phone.
Hold it in again to transfer the call back to the headphones.
• Calling the last number dialled: Press [ ►ll ] twice.

Voice control

Note: Works only with certain phone models.
When playback is stopped and no existing call is proceeding, you can activate
your phone's voice control by pressing in [ ►ll ] for 2 sec.

Care and maintenance

• Clean the headphones using a lightly moistened cloth. Use only mild cleaning
agents, never solvents or corrosive chemicals.
• Make sure that the battery is fully charged if you do not intend to use the head-
phones for a long time. The battery should be charged every 3 months when
the headphones is not being used, in order for the battery to maintain full capacity.

Troubleshooting guide

The headphones Make sure that the battery is charged.
will not switch on. Refer to the Charging section above.
Poor or no sound. • Adjust the volume on both your telephone and
the earphones.
• Make sure that the Bluetooth connection has been
properly established.
• Test the playback from your telephone before connecting it.
• Try playback using another file or format e.g. MP3.
The file you are attempting to play may be incompatible
or corrupted.
• Make sure that no other wireless devices are disrupting
the Bluetooth connection.
• Make sure that your telephone is within the 10 m
headphones receiving range.
Responsible disposal
This symbol indicates that this product should not be disposed of
with general household waste. This applies throughout the entire EU.
In order to prevent any harm to the environment or health hazards
caused by incorrect waste disposal, the product must be handed in
for recycling so that the material can be disposed of in a responsible
manner. When recycling your product, take it to your local collection
facility or contact the place of purchase. They will ensure that
the product is disposed of in an environmentally sound manner.

Specifications

Bluetooth V 4.1
Compatible with A2DP, AVRCP, HSP, HFP
Range 10 m
Charging time 2 hours
Listening time 5 hours
Standby time 180 hours
Weight 14.22 g