The Windows Client Ap Connection Screen - ATEN CL5708I User Manual

CL5708I / CL5716I User Manual

The Windows Client AP Connection Screen

A description of the Connection Screen is given in the following table:
Item
Menu Bar
Server List
Server
Message Panel
Switch to Remote View Once you have been authenticated (see Connecting –
58
The Menu Bar contains two items: File and Help.
The File Menu allows the operator to Create, Save, and
Open user created Work files
).
page 60
The Help Menu displays the WinClient AP version.
Each time the WinClient.exe file is run, it searches the user's
local LAN segment for KVM over IP switches, and lists
whichever ones it finds in this box. If you want to connect to
one of these units, double-click it. (See Connecting –
Windows Client AP, page 59 for details.)
Note: 1. The switch will not appear in the list unless its
Enable Device List configuration parameter has
been enabled. See Operating Mode, page 132 for
details.
2. Only units whose Access Port settings for Program
(see Service Ports, page 134) match the number
specified for Port in the Server area of this dialog
box appear in the Server List window.
This area is used when you want to connect to a KVM over IP
switch at a remote location. You can drop down the IP list box
and select an address from the list. If the address you want
isn't listed, you can key in the target IP address in the IP field,
and its port number in the Port field. (If you don't know the
port number, contact your Administrator.)
When the IP address and Port number have been
specified, click Connect. (See Connecting – Windows
Client AP, page 59 for details.)
When you have finished with your session and come back
to this dialog box, click Disconnect to end the connection.
Located just to the right of the Server panel, the Message
panel lists status messages regarding the connection to the
KVM over IP switch.
Windows Client AP, page 59 for details), this button becomes
active. Click it to switch to the GUI Main Page. The GUI Main
Page is described on page 68.
Description
(
see The File Menu,