Scan; Array - ATEN CL5708I User Manual

CL5708I / CL5716I User Manual
To access and operate a port, double-click its icon. Port operation details
are discussed in Chapter 14, Port Operation.

Scan

Scan is found at the bottom of the AP GUI Sidebar. It automatically
switches among all the ports that are visible in the Sidebar (see Filter,
below), at regular intervals, so that their activity can be monitored
automatically. See Auto Scanning, page 172, for details.
Note: This item doesn't appear at the bottom of the Sidebar in the Browser
version. In that version, you must invoke it from the port's Toolbar. See
The Port Toolbar, page 170 for details

Array

Array is found at the bottom of the AP GUI Sidebar. It represents
another way of monitoring port activity. Under this function your
screen is divided into a grid of panels, with each panel showing the video
display of a particular port. Only ports that are visible in the Sidebar (see Filter,
below), and that are on line are displayed – all other ports are blank. See Panel
Array Mode, page 175 for details
Note: This item doesn't appear at the bottom of the Sidebar in the Browser
version. In that version, you must invoke it from the port's Toolbar. See
The Port Toolbar, page 170 for details
100