The List Panel; The Event Panel - ATEN CL5708I User Manual

The List Panel

The List panel contains six fields:
Field
ID / State
Address
Port
Connection
Days
Description

The Event Panel

The lower panel displays log events for the currently selected unit. Note that if
there are more than one units, even though they aren't currently selected, if their
Recording checkbox is checked, the Log Server records their log events and
keeps them in its database.
Shows the ID number of the device and determines whether
the Log Server records the ticks for this unit, or not. If the ID
checkbox is checked, the State field displays Recording, and
the ticks are recorded. If the ID checkbox is not checked, the
State field displays Paused, and the ticks are not recorded.
Note: Even though a unit is not the currently selected one, if
its Recording checkbox is checked, the Log Server will still
record its ticks.
This is the IP Address or DNS name that was given to the unit
when it was added to the Log Server (see Configure,
page 179).
This is the Access Port number assigned to the unit (see
Configure, page 179).
If the Log Server is connected to the unit, this field displays
Connected.
If the Log Server is not connected, this field displays
Waiting. This means that the Log Server's MAC address
has not been set properly. It needs to be set on the Device
Management Date/Time page (see page 152).
This field displays the number of days that the unit's log events
are to be kept in the Log Server's database before expiration
(see Configure, page 179).
This field displays the descriptive information given for the unit
when it was added to the Log Server (see Configure,
page 179).
Chapter 15. The Log Server
Explanation
185