Mouse Problems - ATEN CL5708I User Manual

Mouse Problems

Problem
Mouse and/or Keyboard not
responding.
Mouse movement
extremely slow
There are two mouse
pointers after the remote
server is accessed.
When the mouse pointer is
in Single Pointer mode, I
can't access the Control
Panel.
Why is there a Dual Pointer
mode?
Mouse pointer confusion
When I log in with my
Windows system, the local
and remote mouse pointers
do not sync.
When I log in with my Mac
system, the local and
remote mouse pointers do
not sync.
Unplug the cable(s) from the console port(s), then plug it/
them back in.
There is too much data being transferred for your
connection to keep up with. Lower the video quality (see
Video Settings, page 67) so that less video data is
transmitted.
You can select another pointer type. See Mouse Pointer
Type, page 80 for details
Recall the Control Panel and immediately change the
pointer to Dual mode.
When you are not in Mouse DynaSync Mode, you need
the two pointers so that you know the remote server
pointer is actually at the location you think it is at.
Otherwise, you might perform a mouse operation and
because of net lag the remote server pointer may not be
at the location that your client computer pointer is at.
If you find the display of two mouse pointers (local and
remote) to be confusing or annoying, you can use the
Toggle Mouse Display function to shrink the non-
functioning pointer. See Toggle Mouse Display, page 59,
and Mouse Pointer Type, page 80.
1. Check the status of the Mouse Sync Mode setting
(see Mouse DynaSync Mode, page 82). If it is set to
Automatic, change the setting to Manual and refer to
the information for Manual Mouse Synchronization
on page 83.
2. If you are in Manual mode, use the AutoSync feature
(see Video Settings, page 67), to sync the local and
remote monitors.
3. If that doesn't resolve the problem, use the Adjust
Mouse feature (see Adjust Mouse, page 59) to bring
the pointers back in step.
4. If the above fails to resolve the problem, refer to
Additional Mouse Synchronization Procedures,
page 224, for further steps to take.
There are two automatic Mouse DynaSync settings: the
default, and Mac2. If mouse synchronization is not
satisfactory with the default, try the Mac 2 setting. See
the Note on page 83 for details.
Resolution
Appendix
211