Maintenance - Be Cool Sleep 'n' Go Instructions Manual

GB
THE METHOD TO OPEN
1
Take out the playoenb from carrybag.
2
Release the mattress and open it.
3
Open the sides until to be locked in position.
4
Push the floor centre down until it is completely flat and stable.
THE METHOD TO FOLD
5
Take out the mattress and pull the centre band up to higher as figure
6
Release the button up on rails centre, make it droop as "V" please pull the centre
band up more, if not be completely droopy then press again as figures.
Secure the bulge fully up, push four legs together.
7
Wrap it in mattress and clip tightly as figure.
8
Put the whole wrap in the carry bag for travel.
THE USAGE OF SECOND LAYER (ADDITIONAL PURCHASE)
9
Fit the tubes together.
10
Takes off the mattress.
11
Place the mattress support inside the cot, ensuring that all the hooks are hooked
over the top rails. Now place the mattress inside the support.
23

MAINTENANCE

Hand wash the carrying bag with cold water. Use a mild detergent and leave to dry naturally.
The mattress and the cot should also both be hand washed using the same method as for the
carrying bag.
17 17