Be Cool Sleep 'n' Go Instructions Manual page 5

by its clothes or accessories: cords, comforter chain links, etc., which could
lead to a danger of strangulation.
• WARNING: This cot is not designed for commercial use or for storing products.
• WARNING: Do not use the cot if any of the parts are broken, in bad condition
or missing, and only use replacement parts that have been approved by the
manufacturer.
• WARNING: Do not use more than one mattress in the cot.
• WARNING: The lowest position is the safest position; it is advisable to use this
position once the child can sit up by himself.
• WARNING: The maximum mattress thickness that can be used with the cot is
indicated with an arrow inside the cot.
• WARNING: The length and width should be 115x66cm. as minimum. The
gap between the mattress and the sides and the head and footboard must
not exceed 30 mm.
• WARNING: Make sure that the assembly mechanisms are always appropriately
adjusted and they should be regularly checked and adjusted if necessary.
• WARNING: The cot should not be used if the child is able to get out of the
cot by himself.
5