Maintenance; Recommendations - Be Cool Apollo Plus Manual

EN signal is displayed.

MAINTENANCE

Fitting / Removing the cover
The cover of the APOLLO seat is very easy to remove.
There are 2 fastening points for the cover on the
front. Unfasten these points and gently pull the front
part of the cover.
There are plastic parts on the sides of the cover used
to fasten it in place. Simply pull gently to remove
the cover.
To fit the cover back on, follow the same steps in
reverse. Insert the side parts in the slot.
Cleaning
The cover can be machine washed using mild
detergent and at a maximum temperature of 30º.
Please follow the washing instructions on the care
label on the cover.
32
Do not tumble dry the cover as the padding could
come away from the fabric.
Do not expose the cover to sunlight for prolonged
periods, when the seat is not in use cover it up or
store it in the luggage compartment.
The plastic parts can be cleaned with a damp cloth
and neutral detergent.

RECOMMENDATIONS

Keep this instruction book for future reference.
Always store it in the compartment under the base.
Make sure that all luggage as well as any other object
that could cause an injury in the event of an accident
is properly secured or fastened inside the vehicle.