Maintenance - Be Cool camper Instructions Manual

GB
1 Transporting the cot folded and in its bag using its own wheels.
2
Open the zips to take the cot out of the carrying bag.
3
Take the whole cot out of the bag.
4
Undo the Velcro strips to separate the mattress from the rest of the cot.
5
Start to open the cot separating the four corners.
6
Completely raise the four sides and fasten them in the upper position turning the mecha-
nism found inside the fabric 90º'bc.
7 General view of one of the sides being fastened.
8
View of the assembled cot with the upper parts of the four sides fastened.
Press and flatten the base of the cot.
9
10
Fitting the mattress with the soft part upwards.
View of the cot completely assembled with the mattress positioned in the bottom part.
11
12
Fasten the supplementary mesh screen halfway up level securing it in the following way:
1) with the side zips, 2) with the six buckles, three and three, of the heads and 3) with the
13 Velcro bands at the end of the rail.
14
View of the inside of the cot with the mesh screen fitted halfway up.
Once the mesh screen is fastened into place as shown in photos 12 and 13, fit the mattresson
15
top and then the cot is ready for use at mid height.
16 To fold the cot the first operation is to raise the base halfway up the sides.
Next, follow the operation in reverse order, in other words turn the inner mechanisms ofthe
17
side bars 180º'bc to start folding the cot.
18 Once the sides have been folded, fold the whole block inwards around the central axle.
19
Push the whole cot inwards at the centre.
Place it on top of the mattress as shown in the photo.
20
Roll the mattress around the body of the cot and fasten it with the Velcro strips.
21
Put it all in the carrying bag.
22
23
Close the bag with the zips.

MAINTENANCE

Hand wash the carrying bag with cold water. Use a mild detergent and leave to dry naturally.
The mattress and the cot should also both be hand washed using the same method as for the
carrying bag.
13