Arp; Dhcp - Televes 769501 User Manual

GPON ONT

5.5.5 ARP

Selection of the Device Info sub-menu ARP item, compresses the open Device Info sub-menu if expanded (eg Statistics) and shows in the main
window the Device ARP information, Figure 5-11.
Device ARP information parameter description can be found in Table 5-7.
ARP is used to convert an IP address to a Physical address. The ARP table
In the example bellow the IP Address is the allocated IP address by the Refs. 769501-769502 the latop connected to one of the device ETH LAN
ports and used to access the device GUI (Graphic User Interface) for Device configuration. The HW address corresponding to this IP address is the
laptop MAC, the ARP flags value is complete since the IP address was successfully resolved to the Laptop MAC address . The logical device the
laptop is connected is the Refs. 769501-769502 bridge br0. This is the ARP table for this device.
Parameter
IP Address
Flags
HW address
Device
Metric
Service
Interface

5.5.6 DHCP

Selection of the Device Info sub-menu DHCP item, compresses the open Device Info sub-menu if expanded (eg Statistics) and shows in the main
window the Device DHCP Leases information, Figure 5-12.
Device DHCP information parameter description can be found in Table 5-8.
Figure 5-11: Device ARP Info
Description
External Device IP Address
ARP status indication flag:
Complete
Incomplete...
External device Hardware address
Used Device Interface
Used Metric
Service using the route
Interface used by the route
Table 5-7: Device ARP information Table parameters
Figure 5-12: Device DHCP Leases Info
46