Upnp" Node; Intf-Grouping" Node - Televes 769501 User Manual

GPON ONT

7.2.15 "upnp" node

This node is used to enable/disable UPnP (Universal Plug and Play). UPnP is activated only when there is a live WAN service with NAT enabled.
+ upnp[@config, @show]
7.2.15.1 Permissions
Command
/upnp/config
/upnp/show
7.2.15.2 "config" command
Name
Description
Full path
Arguments
<MANDATORY>

7.2.16 "intf-grouping" node

Interface Grouping supports multiple ports to PVC and bridging groups. Each group will perform as an independent network.
+ intf-grouping[@config, @remove, @show]
7.2.16.1 Permissions
Command
/intf-grouping/config
/intf-grouping/remove
/intf-grouping/show
Figure 7-15: upnp node tree
Table 7-55: upnp node command permissions
config
Configures UPnP
/upnp/config
--enable Enable UPnP <yes|no>
Table 7-56: "config" command information
Figure 7-16: intf-grouping node tree
Table 7-57: intf-grouping node command permissions
Admin Support
Yes Yes
Yes Yes
Admin Support
Yes No
Yes No
Yes No
186
User
No
No
User
No
No
No