Routing" Node - Televes 769501 User Manual

GPON ONT
7.2.7.2.3 "outgoing" sub-node
By default, all outgoing IP traffic from LAN is allowed, but some IP traffic can be BLOCKED by setting up filters. The aim of this sub-node is to allow
the configuration of those filters.
7.2.7.2.3.1 "create" command
Name
Description
Full path
Arguments
<MANDATORY>
7.2.7.2.4 "remove" command
Name
Description
Full path
Arguments
<MANDATORY>

7.2.8 "routing" node

This node allows the configuration of some routing settings.
+ routing[]
+ defaultgw[@config, @show]
+ static-route[@config, @remove, @show]
create
Creates a filter
/security/ip-filtering/outgoing/create
--dest-ip Destination IP address
--dest-port Destination port
--ip-version IP version <IPv4|IPv6>
--name Filter name
--protocol Protocol <TCP/UDP|TCP|UDP|ICMP>
--src-ip Source IP address
--src-port Source port
Table 7-42: "create" command information
remove
Removes an existing filter
/security/ip-filtering/ougoing/remove
--name-to-rmv Filter name to remove
Table 7-43: "remove" command information
Figure 7-8: routing node tree
180