Mac Filter - Televes 769501 User Manual

5.7.3 MAC Filter

Selection of Advanced Setup submenu Wireless, item MAC Filter will display a Wireless-MAC Filter configuration window, Figure 5-160.
A short on line help text is provided in the configuration window.
In order to configure MAC filter:
STEP 1. Select SSID from the selection combo box;
STEP 2. Choose the MAC Restrict Mode by selecting the desired Mode at the corresponding checkbox;
STEP 3.
If disabled selected, the configuration is finalized
STEP 4. If allow or deny selected MAC addresses to be filtered must be entered at the MAC address table;
Note: If "Allow" option is selected and the MAC address table is empty WPS will be disa
STEP 5.
To enter the MAC addresses to filter in the MAC address table use the Add button;
STEP 6. To remove MAC addresses from the table, select the checkbox on the Remove Column for the desired MAC address and use the Remove
button.
Figure 5-160: Wireless –MAC Filter configuration window –configuration exemple
131
EN