Statistics" Node; Dhcp" Node - Televes 769501 User Manual

7.2.13 "statistics" node

This node allows the user to view and reset the current WAN/LAN/optical statistics on the device.
The –option argument is a mandatory argument to all the commands in this tree and is used to select the type of packets to show, Received,
Transmitted or all. The following argument values can be used: <received|transmitted|all>.
+ statistics[]
+ lan[@reset, @show]
+ optical[@reset, @show]
+ wan[@reset, @show]
7.2.13.1 Permissions
Command
/statistics/lan/reset
/statistics/lan/show
/statistics/optical/reset
/statistics/optical/show
/statistics/wan/reset
/statistics/wan/show

7.2.14 "dhcp" node

A DHCP-enabled client obtains a lease for an IP address from a DHCP server. Before the lease expires, the DHCP server must renew the lease for the
client or the client must obtain a new lease. This node shows the DHCP leases table.
+ dhcp[@show]
7.2.14.1 Permissions
Command
/dhcp/show
Figure 7-13: statistics node tree
Table 7-53: Statistics node and sub-node tree command permissions
Figure 7-14: dhcp node tree
Table 7-54: dhcp node command permissions
Admin Support
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Admin Support
Yes Yes
185
User
Yes
Yes
Yes
Yes
Yes
Yes
User
Yes
EN