Yamaha VIKING YX70MPJ Owner's Manual page 124

10. Wash the sponge material in warm soapy
water to remove remaining solvent, then
rinse thoroughly with plain warm water.
11. Squeeze excess water out of the sponge
8
material. NOTICE: Do not twist the
sponge material when squeezing it.
[ECB00442]
12. Allow the sponge material to dry thor-
oughly. Inspect the sponge material and
replace it if damaged.
13. Thoroughly apply Yamaha foam air filter
oil or other quality liquid foam air filter oil
(not spray type) to the sponge material.
The sponge material should be wet but
not dripping.
14. Pull the sponge material over its frame.
15. Install the air filter element holder.
16. Install the air filter element.
17. Install the air filter case cover by fitting the
pivot holders onto the projections on the
air filter case, and then close and lock the
cover in place with the snap holders.
1. Pivot holder
2. Projection
8-29
1
2