Displaying And Maintaining Configuration Files - HP 5920 series Fundamentals Configuration Manual

The file is corrupt or not fully compatible with the device.
•
If both the main and backup next-startup configuration files are deleted, the device uses factory defaults
at the next startup.
To delete a file that is set as both main and backup next-startup configuration files, you must execute both
the reset saved-configuration backup command and the reset saved-configuration main command.
Using only one of the commands removes the specified file attribute instead of deleting the file.
For example, if the reset saved-configuration backup command is executed, the backup next-startup
configuration file setting is set to NULL, but the file is still used as the main file. To delete the file, you must
also execute the reset saved-configuration main command.
Perform the following task in user view:
Task
Delete next-startup configuration
files.

Displaying and maintaining configuration files

Execute display commands in any view.
Task
Display information about configuration
rollback.
Display the running configuration.
Display the configuration differences between
the current startup configuration file and the
next-startup configuration file.
Display the factory defaults.
Display the configuration differences between
two configuration files.
Display the contents of the configuration file for
the next system startup.
Display the valid configuration in the current
view.
Display the names of the configuration files for
this startup and the next startup.
The display current-configuration diff and display diff commands are available in Release 231 1P04 and
later versions.
Command
reset saved-configuration [ backup |
main ]
Command
display archive configuration
display current-configuration [ configuration [ module-name ]
| interface [ interface-type [ interface-number ] ] ]
display current-configuration diff
display default-configuration
•
display diff configfile file-name-s { configfile file-name-d |
current-configuration | startup-configuration }
•
display diff current-configuration { configfile file-name-d |
startup-configuration }
•
display diff startup-configuration { configfile file-name-d |
current-configuration }
display saved-configuration
display this
display startup
100
Remarks
If neither backup nor main is
specified, this command deletes
the main next-startup
configuration file.