Loading The System Image; Rebooting The Device - HP 5920 series Fundamentals Configuration Manual

Task
Telnet to an IPv4 server.
Use SSH to connect to an IPv4 server.
Use FTP to download a file from or upload a file to
an IPv4 server.
Use TFTP to download a file from or upload a file to
an IPv4 server.
To access a remote IPv6 server, execute the following commands as appropriate in user view:
Task
Telnet to an IPv6 server.
Use SSH to connect to an IPv6 server.
Use FTP to download a file from or upload a file to
an IPv6 server.
Use TFTP to download a file from or upload a file to
an IPv6 server.

Loading the system image

IMPORTANT:
The version of the system image must match that of the boot image. Before loading a system image, use the
display version and display install package commands to check the version information of the boot
image and system image.
When you load the system image, the system modifies the main startup software image set to include
only the boot image and system image so the device can reboot correctly.
To load the system image, execute the following command in user view:
Task
Load a system image.

Rebooting the device

To reboot the device, execute one of the following commands as appropriate in user view:
Task
Reboot the current member device.
Command
telnet server-ipv4-address
ssh2 server-ipv4-address
ftp server-ipv4-address user username password
password { get remote-file local-file | put local-file
remote-file }
tftp server-ipv4-address { get remote-file local-file | put
local-file remote-file }
Command
telnet ipv6 server-ipv6-address
ssh2 ipv6 server-ipv6-address
ftp ipv6 server-ipv6-address user username password
password { get remote-file local-file | put local-file
remote-file }
tftp ipv6 server-ipv6-address { get remote-file local-file |
put local-file remote-file }
Command
install load system-package
134
Command
reboot