HP 5920 series Fundamentals Configuration Manual page 153

Step
7. Assign a job to a
schedule.
8. Specify an execution
time table for the
one-time schedule.
To configure a periodic schedule for the device:
Step
1. Enter system view.
2. Create a job.
3. Assign a command to
the job.
4. Exit system view.
5. Create a schedule.
6. Assign user roles to the
schedule.
7. Assign a job to a
schedule.
8. Specify an execution
time table for the
periodic schedule.
Command
job job-name
•
Specify the execution date and
time:
time at time date
•
Specify the execution days and
time:
time once at time [ month-date
month-day | week-day
week-day&<1-7> ]
•
Specify the execution delay time:
time once delay time
Command
system-view
scheduler job job-name
command id command
quit
scheduler schedule schedule-name
user-role role-name
job job-name
•
Execute the schedule at an interval
from the specified time on:
time repeating at time
[ month-date [ month-day | last ] |
week-day week-day&<1-7> ]
•
Execute the schedule at the
specified time on every specified
day in a month or week:
time repeating [ at time [date ] ]
interval interval-time
145
Remarks
By default, no job is assigned to a
schedule.
You can assign multiple jobs to a
schedule. The jobs will be executed
concurrently.
Configure one command as
required.
By default, no execution time is
specified for a schedule.
Executing commands clock
datetime, clock summer-time, and
clock timezone does not change the
execution time table that is already
configured for a schedule.
Remarks
N/A
By default, no job exists.
By default, no command is assigned
to a job.
You can assign multiple commands
to a job. A job with a smaller ID will
be executed first.
N/A
By default, no schedule exists.
By default, the user roles of a
schedule are the user roles of the
schedule creator.
By default, no job is assigned to a
schedule.
You can assign multiple jobs to a
schedule. The jobs will be executed
concurrently.
Configure either command.
By default, no execution time is
specified for a schedule.
Executing commands clock
datetime, clock summer-time, and
clock timezone does not change the
execution time table that is already
configured for a schedule.