Mdc Configuration Task List - HP FlexFabric 12500 Series Configuration Manual

Routing

Hide thumbs Also See for FlexFabric 12500 Series:

Configuration manual (402 pages)

Network management and monitoring command reference (320 pages)

Command reference manual (157 pages)

Table Of Contents

Table of Contents

The physical IRF ports of an IRF link must belong to the same MDC. Otherwise, the link cannot be

•

set up. See

Figure 25 The physical IRF ports of an IRF link must belong to the same MDC

IRF

Make sure at least one IRF link is up. Otherwise, an IRF fabric split occurs.

•

If you assign the physical IRF port of the default MDC to a non-default MDC, all IRF settings on the

•

port will be lost. To assign the physical IRF port of the default MDC to a non-default MDC, make sure

there are other IRF links in up state between the members. Otherwise, an IRF fabric split occurs.

For an MDC that uses the hardware resources of different IRF member devices, make sure there is

•

an IRF link in up state for the MDC between the member devices. Otherwise, the MDC cannot

forward data between the member devices. See

Figure 26 An MDC based on multiple members must have IRF links in up state between members

IRF