HP FlexFabric 12500 Series Configuration Manual page 29

Step
2. Enter Ethernet interface view
or interface range view.
3. Shut down the port or ports.
4. Return to system view.
5. Enter IRF port view.
6. Bind each physical port to
the IRF port.
7. Return to system view.
8. Enter physical IRF port view
or interface range view.
9. Bring up the port or ports.
10. Return to system view.
Command
•
Enter interface range view:
Method 1:
interface range { interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5>
Method 2:
interface range name name
[ interface { interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5> ]
•
Enter interface view:
interface interface-type
interface-number
shutdown
quit
irf-port member-id/port-number
port group [ mdc mdc-id ] interface
interface-type interface-number
quit
•
Enter interface range view:
Method 1:
interface range { interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5>
Method 2:
interface range name name
[ interface { interface-type
interface-number [ to
interface-type
interface-number ] } &<1-5> ]
•
Enter interface view:
interface interface-type
interface-number
undo shutdown
quit
25
Remarks
To shut down a range of physical
IRF ports, enter interface range
view.
To shut down one physical IRF
port, enter its interface view.
By default, all ports are down.
N/A
N/A
By default, no physical ports are
bound to any IRF port.
Repeat this step to assign
multiple physical ports to the IRF
port for link redundancy.
You can bind up to 12 physical
ports to an IRF port.
The binding attempt will fail if
you have bound 12 physical
ports to the IRF port
N/A
N/A
N/A
N/A