Middle Soft Key) #112 - Swisscom Aton CL200 Operating Instructions Manual

(page 36) with after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call barred list.
Important:
R You must store the phone number with an
area code in the call barred list.
n From the caller list:
1
MFN ( )
2
MbN: Select the entry to be barred. a
a
3
MbN: "Anrufer sperren" a
4
MbN: "Ja" a
n By entering phone numbers:
1
(middle soft key) #217 a
2
Enter the phone number (24 digits
max.). a
R To erase a digit, press
3
M N
Viewing/editing/erasing bar call
numbers
1
(middle soft key) #217
2
MbN: Select the desired entry.
R To exit, press M
3
To edit a number:
a Edit the phone number. a
a M N
To erase a number:
a MbN: "Ja" a
Note:
R When editing, press the desired dial key to
add, to erase.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
ATON_CL200_CLT200(en-de)_0731_ve33
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
2
3
a M N
4
5
6
.
Changing the base unit PIN
(Personal Identification Number)
Important:
R If you change the PIN, please make note of
N.
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
1
2
a M N
3
33
Programming
(middle soft key) #256
Enter the base unit PIN (default: "0000").
R If you forget your PIN, contact an
authorised service centre.
Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
are displayed.
R " " is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again. " "
disappears.
Select a memory location by pressing 1
to 6. a
Enter the phone number or area code to
be restricted (8 digits max.). a
M N
R To erase a restricted number, press
.
(middle soft key) #132
Enter the current 4-digit base unit PIN
(default: "0000").
Enter the new 4-digit base unit PIN. a
a M N
2014/07/31 20:28:34
a
33