Getting Started Setting Up - Swisscom Aton CL200 Operating Instructions Manual

Getting Started
Setting up
Connections
R Use only the supplied AC adaptor
PNLV226CE.
R When mounting the unit on a wall, see
page 52.
Press plug firmly.
Hook
To power outlet
Use only the supplied
telephone line cord.
(DSL/ADSL filter*)
To telephone line
Correct
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
10
ATON_CL200_CLT200(en-de)_0731_ve10
"Click"
Incorrect
10
Important:
R To install the telephone line cord, push the
attached plug completely into the wall jack.
Incorrect
Gap
Battery installation
R USE ONLY Ni-MH batteries AAA (R03)
size.
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
Rechargeable Ni-MH ONLY
R When the language selection is
displayed, see page 15.
2014/07/31 20:28:33
Correct
, ).