Screen Saver Mode; Turning The Power On/Off; Initial Settings - Swisscom Aton CL200 Operating Instructions Manual

Icon Feature
Smart-Key Setup
*2
Wecker
Anrufer sperren
*1 Aton CLT200 series: page 3
*2 Aton CL200 series: page 3

Screen saver mode

The backlight goes dark when on a call or
turns off completely after 1 minute of
inactivity if the handset is not on the base unit
or charger.
Activate the handset display again by:
– pressing MFN or MEN when on a call.
– pressing M N at all other times.

Turning the power on/off

Power on
Press M N for about 1 second.
Power off
Press M N for about 2 seconds.

Initial settings

n Direct command code:
Programmable settings can be accessed by
pressing (middle soft key), # and
then the corresponding code on the dial
keypad (page 25).
Example: Press
#101.
n Symbol meaning:
Example: MbN: "Aus"
Press MCN or MDN to select the words in
quotations.
ATON_CL200_CLT200(en-de)_0731_ve15
(middle soft key)
15
Getting Started
Important:
R When you install the batteries for the first
time, the handset may prompt you to set
display language and date and time.
Perform step 2 in "Display language",
page 15, and then press
Continue from step 2 in "Date and
time", page 15.
Display language
1
(middle soft key) #110
2
MbN: Select your desired language. a
3
M N
Date and time
1
(middle soft key) #101
2
Enter the current date, month, and year.
a
Example: 15 July, 2012
15 07 12
R You can select the date format by
pressing #:
– dd/mm/yy (date/month/year)
– yy/mm/dd
3
Enter the current hour and minute.
Example: 9:30
09 30
R You can select 24-hour or 12-hour
clock format ("AM" or "PM") by
pressing .
4
a M N
Note:
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Voice guidance language
Available for:
Aton CLT200 series (page 3)
You can select either "Deutsch",
"Français" or "Italiano" as the voice
2014/07/31 20:28:33
.
15