D-Link DPH-150S Quick Installation Manual page 13

DPH-150S/DPH-150SE uses DHCP to get WAN IP configurations, so phone could access
to network as long as there is DHCP server in it. If there is no DHCP server available, phone
has to be changed WAN network setting to Static IP or PPPoE.
Setting PPPoE mode (for ADSL connection)
1. Get PPPoE account and password first.
2. Press Menu->Settings->Advanced Settings, then enter passwords, and choose
network ->Network settings->Connection Mode, enter and choose PPPoE through
navigation keys and press the Save key.
3. Press Back, then choose PPPoE Set, press Enter.
4. The screen will show the current information. Press Del to delete it, then input your
PPPoE user and password and press Save.
5. Press Back six times to return to the idle screen.
6. Check the status. If the screen shows "Negotiating..." it shows that the phone is trying to
access to the PPPoE Server; if it shows an IP address, then the phone has already get IP with
PPPoE.
Setting Static IP mode (static ADSL/Cable, or no PPPoE / DHCP network)
1. Prepare the network's parameters first, such as IP Address, Net mask,
Default Gateway and DNS server IP address. If you don't know this information, please
contact the service provider or technician of network.
2. Press Menu->Settings->Advanced Settings, then enter passwords, and choose network
->Network settings->Connection Mode, enter and choose Static through navigation keys
and press the Save key
.
2. Press Back, then choose Static Set, press Enter.
3. The screen will show the current information, and then press Del to delete. Input your IP
address, Mask, Gateway, DNS and press Save to save what you input.
4. Press Back six times to return to the idle screen.
6. Check the status, the screen shows "Static" .the screen shows the IP address and gateway
which were set just now, if the phone could display the right time, it shows that Static IP
mode takes effect.
Setting DHCP mode
1. Press Menu->Settings->Advanced Settings, then enter passwords, and choose network
->Network settings->Connection Mode, enter and choose DHCP through navigation keys
and press the Save key
.
13
/ 68