D-Link DPH-150S Quick Installation Manual page 43

Use STUN
Convert URI
DTMF Type
DTMF SIP INFO
Mode
Transportation
Protocol
SIP Version
Caller ID Header
Enable Strict Proxy
Enable user=phone
Enable SCA
Enable BLF List
Enable DNS SRV
Keep Alive Type
Keep Alive Interval
Enable Session Timer
Session Timeout
Enable Rport
Enable PRACK
Keep Authentication
Auto TCP
Enable Feature Sync
Enable GRUU
BLF Server
BLF List Number
SIP Encryption
SIP Encryption Key
Set the line to use STUN for NAT traversal
Convert not digit and alphabet characters to %hh hex code
Set the DTMF type to be used for the line
Set the SIP INFO mode to send '*' and '#' or '10' and '11'
Set the line to use TCP or UDP for SIP transmission
Set the SIP version
Set the Caller ID Header
Enables the use of strict routing. When the phone receives packets from
the server, it will use the source IP address, not the address in via field.
Sets user=phone in SIP messages.
Enable/Disable SCA (Shared Call Appearance )
Enable/Disable BLF List
Set the line to use DNS SRV which will resolve the FQDN in proxy server
into a service list
Set the line to use dummy UDP or SIP OPTION packet to keep NAT
pinhole opened
Set the keep alive packet transmitting interval
Set the line to enable call ending by session timer refreshment. The call
session will be ended if there is not new session timer event update
received after the timeout period
Set the session timer timeout period
Set the line to add rport in SIP headers
Set the line to support PRACK SIP message
Keep the authentication parameters from previous authentication
Using TCP protocol to guarantee usability of transport for SIP messages
above 1500 bytes
Feature Sycn with server
Support Globally Routable User-Agent URI (GRUU)
The registered server will receive the subscription package from ordinary
application of BLF phone.
Please enter the BLF server, if the sever does not support subscription
package, the registered server and subscription server will be separated.
BLF List allows one BLF key to monitor the status of a group. Multiple
BLF lists are supported.
Enable SIP encryption such that SIP transmission will be encrypted
Set the pass phrase for SIP encryption
43
/ 68