Basic Operation - Teac LE1980HD User Manual

Basic Operation

This section explains the general operations of the unit, such as switching the unit on,
selecting the input source, and using the automated channel search command.
Switching the unit on
1. Connect the television unit to the antenna wall socket using a coax television cable.
Connect any other external devices that will provide video input to the television.
2. Using the provided power cable and adapter, connect the television unit to an available
power source.
WARNING: Make sure the power output from your power source matches the power input
labelled on the television adapter.
3. Press the POWER button on the remote control or on the television panel.
4. The on-screen television display should appear.
Selecting an input source
The unit incorporates multiple input sources which can be
selected via the INPUT button on the television panel or
remote control. The following steps explain the procedures
involved.
1. Press the INPUT button to enter the Input menu. The
screen will display the Input Source menu.
2. Use the CH+/- button on the TV set or /\ / \/ direction
buttons to select the desired input source.
3. Press OK to enter the selected source.
NOTE: Please make sure the device is connected
before selecting the input source.
11
Input Source
DTV
ATV
YPBPR
PC
HDMI1
HDMI2
AV
USB
Select
Move Quit
OK EXIT