Remote Control - Teac LE55AE1UHD User Manual

Remote Control

Installing The Remote Control Batteries
1
Note: 1.The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
2. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
3. Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to the instructions.
4. Do not dispose of batteries in a fire, danger of explosion.
Power On/Off
Turning on the TV
1. Plug the TV's power cord into a wall outlet (after this step, the main unit will turn on and enter standby mode
automatically).
2. Press the (Power) button on the TV, or press the (Power) button on the remote control. The TV will turn on.
Placing In Standby Mode
Your TV can be placed in Standby mode in order to reduce the power consumption. The standby mode can be useful
when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the Power button.
2. To switch back on, simply press the power button again.
Remark: Do not leave your TV in standby mode for long periods of time. (when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial.
Changing Programmes
Using the programme selection buttons on the remote control to change programmes
To select a programme, press the corresponding programme selection button on the remote control. For example, to select
programme 8, press the "8" number button on the remote control.
Using the CH+/- buttons to sequentially change programmes
Press the CH+/- buttons on the remote control or on the TV to browse through the TV programmes available in your area.
Using the button to return to the previous programme
To return to the previous viewed programme, press the
1. Open the battery cover.
2
2. Insert batteries (two size-AAA batteries).
Place batteries with their terminals observing the (+) and (-)
indications.
3. Replace the cover and press down until the lock snaps
3
closed. If the remote control is not used for an extended
period of time, remove the batteries from the remote control
as damage may result due to electrolyte leakage from the
batteries.
button on the remote control.
10