11 Installing the IMB03
11.1 Installing the IMB03 on the Upper Level Separately
This section describes the procedure for installing the IMB03 on the upper level separately.
Context
In this scenario, only the IMB03 on the upper level needs to be installed.
Procedure
Step 1 Remove the two protection plates from the top of the IMB03, as shown in
Figure 11-1 Removing the protection plates
Step 2 Install mounting ears horizontally on the IMB03, as shown in
Figure 11-2 Installing mounting ears horizontally
Step 3 Secure the IMB03 to the feet of the ICR, as shown in
11-2
NOTE
NOTE
After all the cables are routed, cut parts of the protection plates and use the cut parts to seal the cable holes
if there is spare space in the cable holes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure
11-2.
Figure
11-3.
Issue 01 (2011-03-30)
DBS3900(ICR)
Installation Guide
11-1.