15 Installing Cables
15.2.9 Cable Connections (-48 V DC, Three RRU3804s+Three
RRU3201s)
This section describes all the cable connections in a base station configured with three RRU3804s
and three RRU3201s in the -48 V DC power supply scenario.
Figure 15-11
15-24
Jumper
NOTE
The E1/T1 cable or FE/GE cable is used according to the on-site requirements. Only an optical cable or
Ethernet cable can be connected to a GE port on the LMPT.
shows the cable connections.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
PGND cable
DBS3900(ICR)
Installation Guide
E1/T1 cable
or FE/GE
cable
Issue 01 (2011-03-30)