15 Installing Cables
Table 15-2
Table 15-2 Cable description
The E1/T1 cable or FE/GE cable is used according to the on-site requirements.
15.2.3 Cable Connections (-48 V DC, Six RRU3201s)
This section describes all the cable connections in a base station configured with six RRU3201s
in the -48 V DC power supply scenario.
Figure 15-3
15-8
describes the cables.
Power cable
Jumper
NOTE
shows the cable connections.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
CPRI cable
PGND cable
DBS3900(ICR)
Installation Guide
GPS clock
signal cable
E1/T1 cable
or FE/GE
cable
Issue 01 (2011-03-30)