Table of Contents
Advertisement
Figure 14. Hole locations in the front of the rack
•
1
Upper rail mounting bracket pin
•
2
Lower rail mounting bracket pin
•
3
Rack mounting screw hole
Step 4.
Ensure that the appropriate bracket pins are installed in the front and rear bracket of each rail.Each
rail comes with four medium pins preinstalled (two in the front bracket and two in the rear bracket).
Large and small pins are provided separately. Use the pins that are appropriate for the mounting
holes in your rack (see Table 6 "Selecting bracket pins for your rack" on page 17).
Table 6. Selecting bracket pins for your rack
Mounting holes
Round,
unthreaded
Round, threaded
Square
Step 5.
At each end of the rail, grasp the tab
15 "Opening the hinge brackets" on page 18).
Bracket pins
Use the preinstalled medium pins.
Unscrew the medium pins and replace with the smaller pins supplied with the rails.
Unscrew the medium pins and replace with the large pins supplied with the rails.
1
and pull firmly to open the hinge bracket (see Figure
.
Chapter 2
Installing the Lenovo Storage V7000 hardware
17
Advertisement
Table of Contents
