Table of Contents
Advertisement
• When the rack cabinet is in the new location, complete the following steps:
– Lower the four leveling pads.
– Install stabilizer brackets on the rack cabinet.
– If you removed any devices from the rack cabinet, repopulate the rack cabinet from the lowest
position to the highest position.
• If a long-distance relocation is required, restore the rack cabinet to the configuration of the rack
cabinet as you received it. Pack the rack cabinet in the original packaging material, or equivalent.
Also lower the leveling pads to raise the casters off the pallet and bolt the rack cabinet to the pallet.
CAUTION:
• Rack is not intended to serve as an enclosure and does not provide any degrees of protection
required of enclosures.
• It is intended that equipment installed within this rack will have its own enclosure.
CAUTION:
Tighten the stabilizer brackets until they are flush against the rack.
CAUTION:
Use safe practices when lifting.
CAUTION:
Do not place any object on top of a rack-mounted device unless that rack-mounted device is intended
for use as a shelf.
CAUTION:
If the rack is designed to be coupled to another rack only the same model rack should be coupled
together with another same model rack.
Danger notices for Lenovo Storage V7000
Ensure that you are familiar with the danger notices for Lenovo Storage V7000.
DANGER
When working on or around the system, observe the following precautions:
Electrical voltage and current from power, telephone, and communication cables are hazardous. To
avoid a shock hazard:
• If Lenovo supplied a power cord(s), connect power to this unit only with the Lenovo provided
power cord. Do not use the Lenovo provided power cord for any other product.
• Do not open or service any power supply assembly.
Advertisement
Table of Contents
