Maintenance - ergoline ESSENCE 280 SMART POWER 120 Operating Instructions Manual

Cleaning and maintenance
36
Component
1 Entry area
2 Foot mat (Plastic) /
Mirror
3 Control panel
4 Holding bars
Protective goggles
MP3 cable
5 Acrylic glass panels
6 Surfaces
NOTE:
Cleaning must be confirmed after each tanning session by
pressing the START/STOP button (when the warm-down
time for the main fan has finished).
5.6

Maintenance

Maintenance and care play a major role in deciding whether the device meets
the requirements placed on it in a satisfactory manner. Compliance with the
specified maintenance intervals and the careful conducting of the mainte-
nance and care work are therefore absolutely necessary.
The current operating hours of maintenance parts can be called up in service
mode (see 'Voreinstellungen/Presettings', Order-No. 1008953-..).
We point out that the device must be subjected to regular inspections by our
customer service or an approved specialized company every 12 months (from
commissioning) to maintain its proper condition!
Interval Activity
X Cleaning and disinfection
X Cleaning and disinfection
X Cleaning and disinfection
X Cleaning and disinfection
X Cleaning and disinfection
X Cleaning and disinfection
X Cleaning
X Cleaning
See
page
34
34
34
34
34
34
34
34