Instruction Signs On The Device; Technical Modifications; Manufacturer's Guarantee - ergoline ESSENCE 280 SMART POWER 120 Operating Instructions Manual

04/2011 1008775-02
Further details can be found in the information brochure 'Audio Guide' avail-
able in German and English on the Internet at www.jk-global-service.de.
2.15

Instruction signs on the device

See Appendix page 53.
2.16

Technical modifications

The device has been constructed in accordance with the current state-of-the-
art and the applicable safety regulations. The illustrations and specifications
on these instructions are subject to technical modifications which are required
in order to improve the device.
Unauthorized modifications and changes to the device and its control unit are
prohibited. Failure to comply voids the EC conformity declaration and the GS
seal!
Please use only original spare parts. Failure to comply voids the EC confor-
mity declaration and the GS seal!
2.17

Manufacturer's guarantee

JK-International GmbH accepts liability for any tanning device defects that
arise in accordance with the following regulations on behalf of customers who
have purchased an tanning device for private or commercial use from one of
JK-International GmbH's sales partners; consumable parts such as UV low
pressure lamps (tubes) and starters, as well as the acrylic glass panels, are
not covered by the guarantee.
The guarantee stipulates that JK-International GmbH will rectify any defects
within a time period predetermined by JK-International GmbH by repairing or
exchanging the defective part.
Claims made in accordance with this guarantee can be lodged with
JK-International GmbH or the JK-International GmbH sales partner from
whom the product was purchased on presentation of the guarantee card or
invoice; this guarantee is valid for a period of 24 months from the date of
purchase.
This does not affect the rights of the customer under the existing guarantee
with regard to any claims that the customer might have in accordance with the
contract of purchase.
Information for the operator
Operating instructions – 13