Envelope Tray; Large Capacity Feeder - Oki ES9476 MFP Hardware Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
 Envelope Tray
Open the paper source tray, and remove the jammed paper.
1
Check that the guide width is correct, there is no folded/curled paper or overloading, and then
2
close the tray.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides. In
particular, be sure that the upper limit for envelope is not exceeded when placing envelope in the Envelope Tray.
The amount of envelope you can load in the tray is lower than that for plain paper.
 Large Capacity Feeder
Open the tray of the Large Capacity Feeder.
1
Pull out the right-hand tray and remove the jammed paper.
2
30 Clearing a Paper Jam