Promax FA-405 Manual page 71

USER'S MANUAL FA-405
Explain: When the message of KF<cr> is sent to the power supply from computer,
the power supply will set the wheel knob to Fine status immediately.
Example: The present wheel knob status is at Normal, the KF<cr> message is sent
to the power supply, the wheel knob status will become Fine.
KN
Function: Set the wheel knob to Normal status.
Syntax: KN<cr>
When the message of KN<cr> is sent to the power supply from computer,
Explain:
the power supply will set the wheel knob to Normal status immediately.
Example: The present wheel knob status is at Fine, the KN<cr> message is sent to
the power supply, the wheel knob status will become Normal.
KO
Function: Set the Relay status to Invert.
Syntax: KO<cr> HEX = 4B 4F 0D
Explain: When the message of KO<cr> is sent to the power supply from computer,
the power supply will invert the relay status immediately.
Example: The present relay status is at OFF, the KO<cr> message is sent to the
power supply, the relay status will become ON, send the message again
will become OFF.
KOE
Function: Set the Relay status to ON.
Syntax: KOE<cr> HEX = 4B 4F 45 0D
Explain: When the message of KOE<cr> is sent to the power supply from
computer, whatever the relay status is, the relay of power supply will be
set to ON immediately.
12/2003
HEX = 4B 4E 0D
Page 27