Installation; Power Supply - Promax FA-405 Manual

USER'S MANUAL FA-405

3. INSTALLATION

3.1 Power Supply

This instrument has been designed to be supplied with a mains voltage of 115 or
230 V AC, 50-60 Hz. For your safety, the sources are protected by a fuse in the input
line and use a standard mains plug with earth connection.
3.2 Mains Voltage Conversion
Conversion from one mains voltage to 115 or 230 VAC is done by change AC
selects switch [9] as shown in Fig. 2.
To convert to different line voltage, perform the following procedure:
(1) Make sure the power cord is unplugged.
(2) Set the AC switch to the desired line voltage position.
(3) Verify that the mains fuse has the suitable value, you must see section
Maintenance.
12/2003 Page 7